Peg-Perego VIAGGIO FLEX 120 Instrucciones De Uso página 31

Installing the booster seat in the vehicle
5. To release Viaggio Flex
120 from the vehicle seat,
squeeze the handle (1) and
the seat until the release
buttons on the side of the
2
base are fully revealed.
In doing so, the release
buttons will be visible
on the sides of the base;
squeeze the two buttons
1
(2) until you hear the
attachments click open. At
this point you can remove
the booster seat.
6.
To reposition the
connectors inside the base
1
(when not in use), squeeze
the lever once more (1) and
simultaneously push one
of the two connectors in (2)
until they disappear.
2
31