GE AEE18 Manual Del Propietario Y Instrucciones De Instalación página 11

Window Installation Instructions
WINDOW REQUIREMENTS
1
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
30" to 41"
(With accordion panels)
STORM WINDOW REQUIREMENTS
2
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the stool.
WOOD PIECES–
WIDTH: 2"
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the stool to
make it 1/2" higher than the top of the
storm window frame or the vinyl frame.
Attach securely with nails or screws
provided by the installer.
1/2" higher
than storm
window
frame
Storm window
frame
18" min.
1/2" higher
than vinyl frame
(on some windows)
Wood
Stool
Vinyl frame
REMOVE THE AIR CONDITIONER
3
FROM THE CASE
Remove the inlet grille.
A
Remove the filter.
B
Remove the painted screws from each side
C
and the screw in the front. Save to reinstall
Screw
later.
Grasp the lower corners of the grille frame
D
while pressing in on the case side tabs with
your finger tips. Pull out to release and lift
it up.
NOTE: Do not pull the bottom edge toward
you more than 3" or you may damage the
tabs of the grille.
11
Screw
Screw