GE AEE18 Manual Del Propietario Y Instrucciones De Instalación página 14

Window Installation Instructions
8 INSTALL THE AIR CONDITIONER
IN THE CASE
Make sure the ground
A
wire is off to the side
and slide the air
conditioner into the
case. Do not push
on the controls or the
finned coils. Make
sure the air
conditioner is
firmly seated.
Reinstall the locking bracket and screw
B
removed earlier.
Reconnect the ground wire to the air
C
conditioner using the screw removed earlier.
IMPORTANT: The ground wire must be
reinstalled to ensure a proper ground.
Reattach the front grille frame to the case
D
by inserting the tabs on the grille frame into
the slots on the front top of the case.
Guide the lever carefully
through the grille frame
as you push it in.
8 INSTALL THE AIR CONDITIONER
IN THE CASE
Press the grille frame in around the power
E
cord on the right side. Secure the grille with
the painted screws on each side and the
screw in the front that were removed
earlier.
Screw
Reinstall the filter.
F
Reinstall the inlet grille. Connect power.
G
Caulk or weather-strip any gaps or openings
to the outside to seal the installation.
14
(cont.)
Screw
Screw