cecotec DRUMFIT SITBIKE GEL Manual De Instrucciones página 8

ESPAÑOL
- It is important to avoid using abrasive chemicals that may compromise the integrity of
the saddle material.
Dirt and stain removal:
- If stubborn stains are identified, a mild cleaner specifically designed for bicycles can be
used.
- Apply the cleaner to a cloth and rub gently over the stain until it is completely removed.
Proper drying:
- After cleaning, ensure that the saddle is completely dry before use.
- Prolonged exposure to direct sunlight should be avoided as this may cause damage to
the material.
Regular inspection:
- Regular inspections for signs of wear or damage to the saddle are encouraged.
- If tears, holes or worn areas are found, replacement of the saddle should be considered.
Correct fit:
It is crucial to ensure that the saddle is properly adjusted in height and angle to ensure
comfort and efficiency while riding.
Weather protection:
If the bicycle is parked outdoors, it is advisable to use a cover to protect the saddle from
inclement weather, such as rain and exposure to the sun.
Additional advice:
- Contact with sharp objects that may cause damage to the saddle should be avoided.
- In case of prolonged storage of the bicycle, it is recommended that the saddle be covered
or removed to prevent dust accumulation and discolouration.
4. TECHNICAL SPECIFICATIONS
Product reference: 07147
Product: DrumFit SitBike Gel
WARNING: compatible with all saddle posts with 7 mm diameter rail and with saddle posts
with 23 mm tube diameter.
Made in China | Designed in Spain
8
DRUMFIT SITBIKE GEL