Beyerdynamic MMX 200 Manual De Uso página 6

MMX 200 wireless
CHARGING
Connect the USB-C connector of the USB cable to
�
the USB-C port on the MMX 200 wireless . Connect the
USB-A connector to your device (e . g . power supply
unit or computer etc . )
During charging, the light guide pulses green .
�
When the battery is low, the light guide flashes red .
�
Press the USB-C connector
firmly into the headset .
OVERVIEW LIGHT GUIDE DISPLAY
Function
Headset tries to connect to receiver/device
Headset connected to Bluetooth® device when
dongle is connected (Augmented Mode is off)
Headset is connected to Bluetooth® device
Incoming call
Augmented mode is activated
Microphone is muted
Headset is being charged
Software update is being carried out
Headset is switched off
Bluetooth® pairing/discovering
Bluetooth® connection lost
Bluetooth® connection lost when dongle is connected
LC3 audio playback
A2DP audio playback
Microphone not muted during call
The MMX 200 wireless is supplied with a charge of
�
approx . 60% . Please fully charge before use .
In order to protect the battery,
�
we recommend, that you do not
charge the product continuously
for more than 30 hours .
Pull the connector carefully
to disconnect when
charging is finished or if
another cable is to be
used .
Light guide display
Flashing red/blue
Slowly flashing orange
Slowly flashing blue
Flashing red/green
Slowly flashing turquoise
Illuminates red
Battery full = illuminates green
Battery > 30% = slowly flashing yellow
Battery < 30% = slowly flashing red
Error = rapidly flashing red
Flashing magenta
Illuminates orange
Alternately flashing blue/red
Rapidly flashing blue
Rapidly flashing orange
Slowly flashing orange
Slowly flashing blue
Slowly flashing green
6