WolfPack HRH24S Manual De Instrucciones página 44

WARNING: This machine has been developed for the use of the detergent
supplied or recommended by the manufacturer. The use of other cleaning
agents or chemicals can affect the safety of the machine.
Warning: High pressure jets can be dangerous if used improperly. The jet
spray must not be directed at persons, active electrical equipment or the
machine itself.
- Do not use the appliance when people are within its range of action unless they are
wearing protective clothing.
- Do not point the jet at yourself or others to clean clothing or footwear.
- Disconnect the power supply before carrying out maintenance by the user.
- High pressure cleaners must not be operated by children or unskilled persons.
- To ensure the machine safety, only use original spare parts from the manufacturer
or spare parts approved by the manufacturer.
- Do not use the appliance if a power cable or important parts of the appliance are
damaged, e.g. Safety devices, high pressure hoses, spray gun.
- If the extension cord is used, the plug and socket must be waterproof.
WARNING: Unsuitable extension cables can be dangerous, if an extension
cable is used, it must be suitable for outdoor use, and the connection must
be kept dry and off the ground. Use of a power cable reel that keeps the
socket at least 60mm above the ground is strongly recommended.
- Switch the appliance off and disconnect it from the power supply before assembly,
cleaning, adjustments, maintenance, storage and transportation.
- The electricity supply connection must be made by a qualified electrician and
comply with IEC 60364-1. If the leakage current to earth exceeds 30 mA per 30 ms,
either a residual current device that will cut off the power supply or a ground fault
interrupt device must be installed.
WARNING: Do not use the machine if a connecting cable or important parts of the
machine are damaged, Eg safety devices, high pressure hoses, spray gun. The
machines are not suitable for connection to portable water pipes. Connect the
machine to the water supply.
- Use the device on a flat surface.
- For safety reasons, make sure you have a three-month control and maintenance.
Before use, check the filter and the nozzle. Make sure there is no contamination. After
use, make sure there is no water in the pump and hose.
Ov
- erload protection: When the nozzle is blocked or the high pressure hose is
kinked, the overload protection function activates automatically and the machine is
switched off. After solving the fault, turn the power back on and switch on the
machine.
44