WolfPack HRH24S Manual De Instrucciones página 49

PROPER USE OF THE PRESSURE CLEANER
THIS UNIT IS INTENDED FOR USE WITH COLD WATER ONLY!
DO NOT USE HOT WATER IN THIS PRESSURE CLEANER.
1.
Operate the pressure cleaner at no more than the fluid pressure rated for the
pressure cleaner. Never run the pressure cleaner without a water supply. Running
the unit without a water supply will cause irreparable damage to the unit.
2.
Make sure that the water supply you use for the pressure cleaner is not dirty,
sandy, and does not hold any corrosive chemical products. Using a dirty water
supply will compromise the long life of the pressure cleaner.
3.
CAUTION - The pressure cleaner can be used for a variety of applications
including washing cars, boats, patios, decks, garages etc. where high pressure is
necessary to remove dirt and debris.
High-pressure water flow can damage the work surface if not used properly!
See the section titled ã Operating InstructionsÀ for more details. Always test the
spray in an open area first.
4.
NEVER move the unit by pulling on the high pressure hose. Use the handle
provided on the top of the unit.
5. Always hold the high pressure gun and wand with two hands. Keep one hand on
the gun/trigger, while supporting the wand with the other hand (see diagram).
When dispensing detergent, the pressure cleaner applies detergent to the
6.
cleaning area at low pressure only. Once the detergent has been applied, spray
the detergent off of the work area by using the adjustable nozzle.
49