WolfPack HRH24S Manual De Instrucciones página 52

3. Mounting the handle and hose hook
Close the reel handle shaft(L) and reel handle shaft (R).
Fix two screws for the front, two screws for the back (M4*16mm).
Fix the coil plates and reel fixed mount on the two sides of the reel.
Put the reel on the long handle.
Fix four screws to connect the reel and long handle (M4*16mm)
Slide the reel long handle to the machine, and fix four screws (M4*22mm)
Infix the reel handle bracket shaft into the reel fixed mount on the right of the machine.
Finish assembling long handle and reel, you can place the high pressure hose by
winding it on the reel.
Note: The screws will be packed together with the manual, pls kindly check and find it
when unpacked.
4. Install accessories rack
Install the accessories rack on the rear housing and fix four screws.(M4*16mm)
52