Roadstar RCR-4635UMP Manual De Instrucciones página 6

3 English
Manual Preset:
Use the above "Manual scan for radio stations" method to choose your desired radio
stations.
Press and hold [MODE] (11) button. "P01" (Storage space) and the notification
"PROG" will appear in the display.
Use the [SKIP+ / TUN+] or [SKIP- / TUN-] (5-6) buttons to select the memory slot
(P01 - P30) and then press the [MODE] (11) button to confirm.
The desired radio stations will be saved at your requested memory slot.
Press the [PLAY/PAUSE] (4) button, each time the key is pressed, it switches to the
next PRESET (01,02,03 etc.)
TAPE OPERATION
Select "TAPE" mode by pressing the [SOURCE] (2) button;
Press [STOP/EJECT] (15.2) button to open the cassette door (12) and insert your
tape;
Close the cassette door (12);
Press [PLAY] (15.5) button to start playing tape.
Press [PAUSE] (15.1) button when you want to stop playing tape operation temporari-
ly, press again to resume tape operation.
Press [STOP/EJECT] (15.2) button when finished, press again to open the cassette
door.
Press [F.FWD] (15.3) button or [RWD] (15.4) button to start rapid tape winding for-
ward / reverse direction.
CD-MP3 OPERATION
Select the CD mode with the [SOURCE] (2) button, until "Cd" is shown in the display.
Insert an audio CD with the printed side facing upwards and then close the lid of the
CD compartment.
In order to remove a CD, please press the [STOP] (4) button, open the CD com-
partment and lift the CD out carefully.
REPEAT/RANDOM:
Press [MODE] (11) button 1 time to REPEAT track
Press [MODE] (11) button 2 times to REPEAT ALBUM
Press [MODE] (11) button 3 times to REPEAT ALL
Press [MODE] (11) button 4 times to RANDOM tracks
Press [MODE] (11) button 5 times to delete function
TRACK PROGRAM:
Stop CD playing. Press [MODE] (11) button, "P01" & Progr will be flash on LCD.
Press and hold [MODE] (11) button. "P01" (Storage space) and the notification
"PROG" will appear in the display.
Use the [SKIP+ / TUN+] or [SKIP- / TUN-] (5-6) buttons to select the memory slot
(P01 - P30) and then press the [MODE] (11) button to confirm.
Press the [PLAY/PAUSE] (4) button, program tracks will be played.