TREND T1 Serie Instrucciones Originales página 11

EN - T1
Thank you for purchasing this Trend product, we hope
you enjoy many years of creative and productive use.
TECHNICAL DATA
Voltage V AC
Type
Power input W
No load speed min 1
Max Plunge Depth mm
Max cutter diameter mm
Collet size (UK & ROI) inch
Collet size (EU) mm
Weight kg
Noise values and vibration values (triax vector sum) according
to EN62841-2-17:
L (emission sound dB(A)
PA
pressure level)
L (sound power level) dB(A)
WA
K (uncertainty for the dB(A)
given sound level)
Vibration emission value m/s
a =
h,hv
Uncertainty K = m/s
The vibration and/or noise emission level given in this
information sheet has been measured in accordance
with a standardised test given in EN62841 and may be
used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
WARNING:
noise emission level represents the main applications
of the tool. However if the tool is used for different
applications, with different accessories or poorly
maintained, the vibration and/or noise emission may
differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
T1ETS T1EPS
230 - 240 230 - 240
1 1
710 710
10000 10000
30000 30000
Trim Base Trim Base
37 37
35 35
1/4 1/4
8 8
1.81 1.81
85 85
96 96
3 3
2 4.6 4.6
1.5 1.5
2
The declared vibration and/or
EN - T1
hands warm (relevant for vibration), organisation of work
patterns.
WARNING:
the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
230 - 240
attention to these symbols.
1
DANGER:
710
situation which, if not avoided, will result in death or
10000
serious injury.
30000
Plunge Base
WARNING:
60
situation which, if not avoided, could result in death or
35
serious injury.
1/4
8
CAUTION:
situation which, if not avoided, may result in minor or
2.84
moderate injury.
NOTICE:
85
to personal injury which, if not avoided, may result in
property damage.
96
3
Denotes risk of electric shock.
4.5
Denotes risk of fire.
1.5
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING:
instructions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool.
1) Work Area Safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
-11-
To reduce the risk of injury, read
Indicates an imminently hazardous
Indicates a potentially hazardous
Indicates a potentially hazardous
Indicates a practice not related
Read all safety warnings,