TREND T1 Serie Instrucciones Originales página 14

1.5mm2; the maximum length is 30m.
When using a cable reel, always unwind the cable
completely.
BOX CONTENTS
A. 1x Motor body
B. 1x Trim base
C. 1x Trim base dust extraction spout
D. 1x Trim base side fence
E. 1x Plunge base
F. 1x Plunge base dust extraction spout
G. 1x Plunge base side fence
H. 2x Plunge base side fence rods
I. 2x Guide bush screws
J. 1x 16mm guide bush
K. 1x Centring pin & cone
L. 1x Multi-functional spanner
M. 1x Storage bag
N. 1x Instruction manual
Check for damage to the tool, parts or accessories
which may have occurred during transport.
Take the time to thoroughly read and understand this
manual prior to operation.
MARKINGS ON TOOL
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Double insulation
Description - (Fig. A)
WARNING:
any part of it. Damage or personal injury could result.
INTENDED USE
The T1 router has been designed for light duty routing of
wood, wood based materials and plastics.
These routers are intended for routing grooves, edges,
profiles and slots as well as copy routing.
DO NOT use under wet conditions or in the presence of
flammable liquids or gases.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
Never modify the power tool or
EN - T1
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
This product is not intended for use by persons
(including children) suffering from diminished physical,
sensory or mental abilities; lack of experience,
knowledge or skills unless they are supervised by a
person responsible for their safety. Children should never
be left alone with this product. The T1 is a professional
power tool.
CAUTION:
controls, read the following sections.
DESCRIPTION OF PARTS - (Fig.1)
1. Variable speed dial
2. Power cable with plug
3. Power switch
4. Motor body rack
5. Spindle
6. Spindle lock
7. Collet
8. Trim base locking knob
9. Trim base height adjustment knob
10. Trim base dust extraction spout
11. Trim base dust extraction spout knob
12. Trim Base Fence locking knob
13. Trim Base Side Fence
14. Depth stop micro-adjustment knob
15. Depth stop indicator
16. Handles
17. Depth stop locking knob
18. Depth stop
19. Turret stops
20. Sub-base
21. Plunge base body clamp
22. Plunge locking lever
23. Plunge base dust extraction spout
24. Plunge base side fence clamps
25. Plunge base side fence rod holes
OPERATION
Instructions for Use
WARNING:
instructions and applicable regulations.
-14-
Before operating any of the
Always observe the safety