Fora Test N'Go Advance Voice Manual Del Propietário página 16

Setting the Meter
Before using your meter for the first time or if you change the meter
battery, you should check and update these settings. Make sure you
complete the steps below and have your desired settings saved.
8
Entering the Setting Mode
Start with the meter off (no test strip
inserted). Press ◄ and ► buttons at
the same time to enter Setting Mode.
1. Setting the date
With the year flashing, press
button until the correct year appears.
Press MAIN.
With the month flashing, press
button until the correct month
appears. Press MAIN.
With the day flashing, press
button until the correct day appears.
Press MAIN.
2. Setting the time
With the hour flashing, press ◄/►
button until the correct hour appears.
Press MAIN.
With the minute flashing, press ◄/►
button until the correct minute
appears. Press MAIN.
◄/►
◄/►
◄/►