Publicidad
Idiomas disponibles
Idiomas disponibles
DOWNLOADING THE RESULTS
Data Transmission via Bluetooth
You can transmit your measurement data from the meter to an App on
your mobile device via Bluetooth signal. Please note that you must
first pair your meter to your mobile device before attempting to
transmit any data. Please contact customer service or the place of
purchase for further assistance.
Pairing with your mobile device
1. Start with the meter switched off. Insert a test strip to turn on the
meter. Wait for the screen to display " " and the Bluetooth
indicator starts to flash. Remove and dispose of the test strip. You
can also activate Bluetooth function by entering Memory Mode
when memory is not empty. Press and release the MAIN button to
enter the memory mode then the Bluetooth indicator will flash.
2. On your mobile device, turn on the Bluetooth function and follow
the instruction on the App to pair the device (e.g., Search for meter,
and Pair).
3. After successfully pairing the App to your meter, the Bluetooth
function on the meter will then start to transmit the data to your
App.
Bluetooth indicator on the meter
BLUETOOTH INDICATOR
Flashing Blue
Solid Blue
The Bluetooth function is enabled and
waiting for connection.
The Bluetooth connection is established.
STATUS
23
Publicidad
