2
Lift the bottom of pool from one side to the
other to let the remaining water drain.
As the bouncer with slide deflates, water will
find the lowest point and drain from the
collapsing pool walls.
3
4
5
18
Remove stakes and move the bouncer
with slide away from the drained
water to a dry area.
Leave the bouncer with slide inflated
until all remaining water has
evaporated and the Water Park is dry.
This may take 2 hours or more
depending on weather conditions.
Untie the drawstring from the short
outlet Tube and allow the bouncer
with slide to fully deflate. Remove the
Hose Assembly and wrap it up with no
kinks.
STORAGE
1
2
Fold over only
Compress air out
as you are rolling
up the product
REPAIR PATCH INSTRUCTIONS
WARNING: Repair patches must be applied by an adult
only.
KEEP OUT OF REACH OF CHILDREN.
INSTRUCTION:
1. Deflate the item, clean the area
and allow to dry thoroughly.
2. Cut a portion of the patch to the
size needed and round the corners.
(See Fig).
3. Remove the adhesive backing from the patch material, position
the patch over the damaged area and smooth out any bubbles.
4. Allow to sit for 30 minutes before re-inflating.
3
Put folded product
into the carrying
bag
CORRECT
OR
INCORRECT
19