Publicidad
Idiomas disponibles
Idiomas disponibles
ENG
THANK YOU
Congratulations on your choice of the Bike Nook™ bicycle stand, the brilliant
new way to store your bike away, quickly and easily.
The Bike Nook™ bicycle stand is as easy as 1-2-3 and saves up to 3.5 feet
(1 meter) of valuable floor space. The best part is that it easily adjusts to
accommodate all kinds of bikes, including mountain bikes, road bikes, racers,
beach bikes and kids' bikes, wheel size 10in/25cm and up, and fat tires*.
Please use these easy to follow instructions for tips on how to set up your Bike
Nook™ and use it for different sizes of bikes.
We hope you enjoy the quick and easy new way to store your bicycle, and all of
the free space you get back!
Thane Direct and its affiliated companies assume no liability for personal injury
or property damage resulting from the misuse of the Bike Nook™ bicycle stand
including the failure to comply with the instructions contained in this User's Guide.
*NOTE: Bike Nook™ Standard unit can accommodate fat tires up to 3.9in/10cm
wide. Bikes with even wider fat tires, up to 5in/13cm, will need the Bike Nook™ Pro
Kit for proper support.
WHAT YOU GET
3
1a. Male Cross Bar
1b. Female Cross Bar
1.
Cross Bar (Male + Female)
2. L-Piece
1a
3. Feet x 2
4a. Short Track
4b. Long Track
1
4. Track (Short + Long)
5. Ramp
6. Diamond Bracket
1b
7.
Upright
8. Adjustable Upright
9. V-Slot
3
10. Adjustment Knob
11. Socket Wrench
12. Allen Key
13. Washers x 7
14. Nuts x 6
15. Long Bolts M6*15 mm x 7
16. Flathead Bolt M6*10 mm x 1
4
2
4a
4b
6
7
10
8
13
12
11
16
15
14
2
STEP 1
Connect the L-Piece to the Cross Bar
Parts Required:
1a. Male Cross Bar
1b. Female Cross Bar
2. L-Piece
3. Feet x 2
12. Allen Key
13. Washer x 1
15. Long Bolt M6*15 mm x 1
16. Flathead Bolt M6*10 mm x 1
Connect the Male Cross Bar (1a) and
Female Cross Bar (1b) by aligning the hole
in the protruding U-shaped metal piece
on the Male Cross Bar (1a) with the hole on
the Female Cross Bar (1b) and inserting the
U-shaped metal piece on the Male Cross
Bar (1a) into the Female Cross Bar (1b).
Once connected, the Male Cross Bar (1a)
and Female Cross Bar (1b) will form the
Cross Bar (1).
Connect the L-Piece (2) to the Cross
Bar (1) by aligning the arrow
5
L-Piece (2) to the arrow on the Cross
Bar (1) so that both arrows are facing in
the same direction.
Align the holes on the L-Piece (2) with
the holes on the Cross Bar (1). Insert the
9
Flathead Bolt (16) into the L-Piece (2) and
tightly screw into the Cross Bar (1) using
the Allen Key (12). Place a Washer (13)
onto the Long Bolt (15). Then insert the
Long Bolt (15) into the bottom (first) hole
of the L-Piece (2) and tighten using the
Allen Key (12).
3
1a
2
16
15
13
1b
3
1a
1
2
on the
1
3
16
3
12
1b
3
13
15
Publicidad
