Descargar Imprimir esta página

Thane Bike Nook Instrucciones De Montaje página 5

Soporte para bicicletas

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

STEP 4
Connect the Adjustable Upright to the Upright
Parts Required:
8. Adjustable Upright
9. V-Slot
10. Adjustment Knob
Place the Adjustable Upright (8) to the
inside of and against the Upright (7).
Given the size of your bicycle, determine
what the height of the V-Slot (9) should
be above the Track (4) (see "Storing Your
Bicycle" section on page 7). Align the
threaded hole on the Adjustable Upright
(8) with the nearest hole on the Upright (7).
Place the Adjustment Knob (10) through
the appropriate hole on the Upright (7)
and screw it tightly into the threaded hole
on the Adjustable Upright (8).
8
9
9
10
8
7
6
STORING YOUR BICYCLE
Setting the height of the V-Slot
Important: To store your bicycle compactly
and securely, the V-Slot must be set at a
height above the Track that matches the
size of your bicycle.
Tip: A rough guide to setting the height of the
V-Slot is to measure the distance between your
bicycle seat tube and the back of the wheel
(measured across the back-wheel axle (see
illustration below). Use this distance as the
approximate height to position the V-Slot above
the Track. Notice through which hole in the
Upright the Adjustment Knob should be placed
to ensure that the V-Slot is set at this height.
Then select the hole in the Upright that is just below
that one to place the Adjustment Knob through.
Secure the Adjustment Upright to the Upright by
tightening the Adjustment Knob.
Horizontal Storage
Position the back wheel of the bicycle against the
10
Ramp, facing the Bike Nook™ Pro (see Fig. 1).
Roll the back wheel of the bicycle over the Ramp onto
the Track until the wheel engages with
the Upright (see Fig. 2).
Vertical Storage
Lift the front of the bicycle upwards and rotate it slowly
to a vertical position, and slightly beyond (see Fig. 3),
until the seat post can be lowered to rest into the
V-Slot, with the back wheel engaged with the Upright
(see Fig. 4).
Set V-Slot
Seat Tube
at this hight
7
Fig. 1
V-Slot
Adjustable
Upright
Upright
Ramp
Track
Fig. 2
Horizontal Storage
Fig. 3
Fig. 4
Strap
V-Slot

Publicidad

loading