Publicidad
Idiomas disponibles
Idiomas disponibles
5
2
mlCLEAR
-9141, I_€,-
1,10
8,10-
3_7_
8,9
5
4,5
In the programmed
edit recording
function
the tracks
can be
programmed
while checking
the remaining
time on each side of
the tape.
1 Insert the tape into deck 1.
Insert the tape with the side to be recorded on first facing out
from the unit. Wind up the tape with _1_1.
2 Press CD and load the disc(s).
3 Press
CD
EDIT/CHECK
twice
while
pressing
SHIFT on the remote
control.
"EDIT"' and "PRGM" are displayed.
• When "AI" is displayed,
press CD EDIT/CHECK
while
pressing SHIFT again.
4 Press
numbered
buttons
on the remote
control
to designate
the tape length.
10 to 99 minutes can be specified.
• The _
and _
are also available to designate the tape
length.
Tape side A (front side)
.... ::::-!.---!-!
Tape length
Maximum recording
time for side A
5 Press DISC DIRECT
PLAY 1-3 to select a disc.
Then,
press
numbered
buttons
0-9 and + 10 on
the remote
control
to program
a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2, then press +10 and 0.
Selected track number
Remaining time on side A
c:>
Program number
.... , ,....
,....,
t......... _'
Programmed tracks
6
Repeat
step 5 for the rest of the tracks
for side
A.
A track whose playing time is longer than the remaining time
cannot be programmed.
7
Press CD EDIT/CHECK
while pressing
SHIFT on
the remote
control
to select side B and program
the tracks
for side B.
After confirming "B" on the display, repeat step 5.
Tape side B (reverse side)
8
Press CD EDIT/CHECK
while pressing
SHIFT on
the remote
control
to select side A and press •
to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the end oftape is reached, deck 1 enters
the recording stop mode. After entering the recording stop
mode, go to step 9.
9
Press CD EDIT/CHECK
while pressing
SHIFT on
the remote
control
for recording
of the second
side.
"B" is displayed.
10 Turn over the tape in deck I and press •
to start
recording.
Recording starts.
To stop recording
Press
II/_ _
on deck
1. Recording
and CD play stop
simultaneously.
To check the order of the programmed track numbers
Before recording, press CD EDIT/CHECK while pressing SHIFT
on the remote control to select side A or B, and press _
or
I_
repeatedly.
Tape side
Program
number
Track number
Programmed
track numbers
To change the program of each side
Press CD EDIT/CHECK while pressing SHIFT on the remote
control to select side A or B, and press • CLEAR to clear the
program on the selected side. Then program tracks again.
To clear the edit program
Press • CLEAR twice so that "EDIT" disappears on the display.
• Up to 30 tracks can be programmed from any of the inserted
discs.
• "FULl" is displayed if you attempt to program more than 30
tracks.
ENGLISH
13
Publicidad
