Publicidad
Idiomas disponibles
Idiomas disponibles
Control features vary by model.
Semect Cycle
To select a cycle, push the control dial WN(off position}
and turn it to the right (clockwise}
until the pointer is
at the soil level needed for the wash load in the
Regular, Wrinkle Free Fabrics or Delicates cycles.
Regular
Fabrics
Cycle
Provides normal agitation and normal spin speeds to
wash cottons and heavily soiled items. For maximum
cleaning, set the dial at Extra Heavy.
Wrinkme Free Fabrics
Cyde
Provides normal agitation and slow spin speed to
protect wrinkle free fabrics.
Dedicates
Cycle
Provides slow agitation
speed and slow spin speed for
delicates
and knits.
Soak
Only
Provides 2 minutes of agitation
and then soak. Avoid
e×tended
soaking
- soak for 30 minetes
or less.
The control dial must be manually advanced to a spin
setting to spin and drain the water.
Pull Control
Dial
to Start
You may stop the washer at any time by simply
pushing the control dial IN. Therefore it is possible to
obtain a non-agitated
soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed IN (off position} when you change the setting.
Note
• Do not attempt to turn the control dial
counterclockwise.
Damage to the timer will result.
Publicidad
