Publicidad
Idiomas disponibles
Idiomas disponibles
Using t heControls - Two-Speed
Models
h/Rin_
[em p
Select Water Level
Determine
the selected setting based on clothes load
see. Selection should provide sufficient
water to permit
clothes to circulate
freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation
begins. To adjust
the water level, turn the control to reset and then back
to the desired setting.
Small
1/4 Full
Medium
1/4 - 112 Full
Large
1/2 - 3/4 Full
Oversize
3/4-
Full
I Note
• Items must circulate
freely for best results.
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing
and cold or warm water for rinsing.
Use the chart below as a guide.
White and heavily soiled, color-fast
Hot/Cold
items
Warm/Warm
Delicate items
Warm/Cold
Moderately
soiled, colored items;
most permanent
press items
Cold/Cold
Brightly colored, lightly soiled
items; washable woolens
Note
• In wash water temperatures
below 65° F,
detergents
do not dissolve well or clean well. Care
labels define cold water as up to 85° F.
Publicidad
