Publicidad
Idiomas disponibles
Idiomas disponibles
Engine failsto start
Engine runserratically
1. PTOIBlade Engage leverengaged,
2,
Parking brakenotengaged.
3.
Sparkplugwire(s)disconnected.
4.
ThrutttelChoke c ontrol l evernotincorrect
startingposition,
5,
Choke notactivated
6,
Fuel t ank empty, o r stalefuel.
7.
Blocked fuelline.
8,
Faultysparkplug(s),
9,
Engine flooded.
!0, BlownFuse(s)
t.
Unitrunning withCHOKE activated,
2,
Sparkplugwire(s)loose.
3.
Blocked fuel lineor stalefuel
4.
Vent in gas cap plugged.
5.
Wateror dirt in fuel system.
6.
Dirty air cleaner.
Engine overheats
t.
Engine oillevel low.
1.
2.
Air flow restricted.
2.
Engine hesitates at high RPM
I.
Spark plug gaptoo close.
1.
Engine idles rough
1.
Spark plug fouled, faulty or gaptoo wide.
1.
2.
Dirty air cleaner.
2.
Excessivevibration
Mower will not mulch grass
Uneven cut
1.
Cutting blade loose or unbalanced.
2.
Damaged or bent cutting blade.
1.
Engine speed too low.
2.
Wetgrass.
3.
Excessively high grass.
4,
Dullblade.
1.
Decknotleveled properly.
2.
Dullblade.
3.
Uneven tirepressure.
1.
Placeleverin disengaged (OFF)position,
2.
Engage parkingbrake.
3,
Connect w ire(s)to sparkplug(s),
4,
Place Throttle/Choke l everintotheFAST position.
5.
Move the Throttle/Chokelever into the Choke
position.
6.
Fill tank withclean, fresh (less than 30 days old) gas.
7,
Replacethe fuel line and replacefuel filter.
8.
Clean, adjust gap or replaceplug(s).
9.
Crankengine withthrottle in FASTposition.
10. ReplaceFuse(s)
1.
Deactivatethe CHOKE.
2.
Connect spark plug wire(s).
3.
Replacethe fuel line; fill tank with clean,fresh
gasoline and replace fuel filter.
4.
Clear vent or replace cap if damaged.
5.
Drain fuel tank. Refill withclean, fresh gasoline.
6.
Replace air cleaner paper elementor clean foam
pro-cleaner, if equipped.
Firl crankcasewith proper amountand weighi oi"oill
Clean grass clippings and debrisfrom around the
engine'scooling finsand housing.
Removespark plug and reset the gap.
Replacespark plug. Set plug gap.
Replaceair cleaner elementand/or clean pro-
cleaner.
I.
Tighten blade and spindle.
2.
Replaceblade.
1.
Place throttle in FAST(rabbit) position.
2.
Do not mulch when grass is wet.
3.
Mow once at a high cutting height, then mow again
at desiredheight or make a narrowercutting swath.
4.
Sharpen or replaceblade.
1.
Perform side-to-sidedeck adjustment.
2.
Sharpenor replaceblade.
3.
Check tire pressure in a]l four tires.
NEED MORE HELP?
_i _
¥m:_I fi_td the an,_wer and mm+e m_ mazl_emyUfe,com
- for free!
_:
• Hnd th_s a_d
a[[ your
other
produ_
manuals ontine.
_i
i " Get answersfrom our team of home experts.
_.
:i " Get a personalized
maintenance
plan for your
ho_ae.
_i
', " F_nd information
and
tools
to help with
home projects.
28
Publicidad
