HEATSTRIP THG2400BA-EU Manual De Instrucciones página 7

Table Layout
General recommendations for HEATSTRIP
•
Ideal mounting height: 2.3m to 2.5m, and the maximum is 2.8m. Minimum is 2.1m.
•
Ideal mounting location: ceiling mounted, directly above area to be heated (e.g. above a table)
For the majority of outdoor applications, the most effective method is to spot heat a table or similar area. The diagrams below
provides an easy selection guide for the approximate model and quantity of heaters required to heat common residential table
settings
Selection are based on HEATSTRIP Enhance (THG-BA-EU) being mounted at 2.4m from the floor in a fully enclosed under-
cover outdoor area.
Above data is based on direct overhead ceiling mounting. If the heaters are wall mounted, the radiant footprint may be
reduced.
The below diagrams show the approximate heating area for each model, based on both an indoor protected, outdoor enclosed
and outdoor exposed location.
®
Enhance (THG-BA-EU):
THG2400BA-EU
THG3200BA-EU
2x THG2400BA-EU
2x THG3200BA-EU
2x THG2400BA-EU
2x THG3200BA-EU