HEATSTRIP THG2400BA-EU Manual De Instrucciones página 8

Installation Requirements
®
The ideal mounting position for the HEATSTRIP Enhance with remote & app control is on the ceiling, directly above the
®
area to be heated. If this is not possible, HEATSTRIP Enhance (THG-BA-EU) can be mounted on a wall and angled
downwards. In this situation, ensure the mounting height is in the range of 2.1m to 2.5m.
For mounting heights more than 2.8m outdoors, we recommend the use of the optional accessories to reduce the height of
®
the heater to 2.3m—2.5m. This will increase the effectiveness of your HEATSTRIP . Refer to the Mounting Accessory
section for more information.
Electrical connections/GPO's should not be located at the back of the heater. They should be located outside the physical
footprint of the units to minimize heat build-up behind the units.
®
The HEATSTRIP Enhance is not suitable for mounting on an incline, along the length.
Incorrect Installation Correct Installation
The heating surface must never
be directed toward the ceiling