Kärcher B 260 RI Manual De Instrucciones página 8

a Cut the hose from the water pump 200 mm before the elec-
tric ball tap.
b Push the end of the hose onto the flowmeter.
c Secure the connections with hose clips.
7. Mount the detergent dosing pump.
8. Cut the hose to the cleaning head after the electric ball tap.
Note
Dimension X=100 mm
9. Insert the T-piece into the hose and secure it with hose clips.
10.Route the hose between the lower connection of the detergent
dosing pump and the T-piece.
11.Secure the connections with hose clips.
8
Detergent container and suction lance
1. Attach the tray.
2. Screw on the tray with the M8 x 12 screws (2x).
3. Place the detergent container on the tray.
4. Pull the detergent suction hose downwards.
Cable tie with clip
1
5. Secure the detergent suction hose and the water hose with the
cable ties with clip (1x).
Note
Make sure that there is sufficient hose for changing the detergent
containers.
English