Kärcher B 260 RI Manual De Instrucciones página 9

6. Connect the detergent suction hose to the upper connection of
the dosing pump.
7. Secure the detergent suction hose with cable ties.
Float switch of chemical tank
1. Unscrew the M6 x 12 screws (3x).
M6 x 12 screw (3 x)
1
Cover
2
2. Remove the cover.
3. Remove the plug from slot X7 on clean module 2.
4. Insert the wires into the plug in accordance with the circuit di-
agram.
White
Brown
4
7
5. Plug the plug into the controller again.
Detergent dosing pump and flowmeter
1. Connect the connector plug of the detergent dosing pump to
the flowmeter.
Note
Wind up the remaining cable and fix it with a cable tie.
2. Pull off the plug.
3. Insert the wires into the plug in accordance with the circuit di-
agram.
Brown
Black
Grey
English
1
3
8
9