GE Profile 22 Manual Del Propietario E Instalación página 23

Inserting the door panels.
Read these instructions completely and carefully.
0
0
Insert the Freezer Panel and Fresh Food Panel.
Carefully push the freezer panel in until it slides
into the slot behind the door handle. Pushthe filler
panel (required with some door panels/in behind the
decorator panel. Repeat for fresh food panel.
If your model has a dispenser,this step only applies to
the fresh food panel and top freezer panel.
Insert the Bottom Freezer Panel (on dispenser models).
Carefully push the panel in until it slides into the slot
behind the door handle. Pushthe filler panel (required
with some door panels)in behind the decorator panel.
0 Attach the Top Trim on the Freezer and Fresh Food Doors.
The Top Trim can be found inside the refrigerator Hand tighten only. ivl(]kesure that the top of each panel
compartment, fits snugly behind the lip of the Top Trim.
With a T-20 Torxdriver, attach the Top Trim, using two
screws on each Top Trim piece,to the top of each door.
Cut-Out
Side Trim
t
Side Trim
23