Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
INSTALLING THE REFRIGERATOR
(CONT.)
I'_ PUT THE REFRIGERATOR IN PLACE
Move the refrigerator
to its final location.
[5] LEVEL THE REFRIGERATOR
The refrigerator
can be leveled by adjusting
the rollers located near the bottom
hinges.
..........._:_>
Rollers _
Raise
Rollers have three purposes:
. Rollers adjust so the door closes easily when
opened about halfway. (Raise the front about
5/8" [16 mm] from the floor.)
. Rollers adjust so the refrigerator
is firmly
positioned
on the floor and does not wobble.
. Rollers allow you to move the refrigerator
away from the wall for cleaning.
To adjust the rollers on 23' (33" wide), 25', 26',
27' and 29' models:
. Turn the roller adjusting
screws clockwise
to raise the
refrigerator,
cou nterclockwise
to lower it. Use
------
a 3/8" hex socket
or wrench, or an
adjustable
wrench.
Roller adjusting screw
r_ LEVEL THE REFRIGERATOR (cont.)
CustomStyle T"models:
Turn the front roller
adjusting screws
clockwise
to raise
the refrigerator,
cou nterclockwise
Roller adjusting screws
to lower it. Use a 3/8" hex
wrench with extension, or an adjustable wrench.
These models also have rear adjustable
rollers so you can align the refrigerator
with
your kitchen cabinets. Use a ]/8" hex wrench
with extension to turn the screws for the rear
rollers-clockwise
to raise the refrigerator,
counterclockwise
to lower it.
[]
LEVEL THE DOORS
%
%
Adjust the refrigerator
door to make the doors
even at the top.
To align:
Using a 7/16" wrench, turn the door adjusting
screw to the right to raise the door, to the left
to lower it.
NOTE:
A nylon plug, imbedded
in the threads
of the pin, prevents the pin from turning
unless a wrench is used.
After one or two turns of the wrench, open
and close the refrigerator
door and check
the alignment at the top of the doors.
Doors should be even at top
32
Publicidad
