MPM MKE-12 Manual De Instrucciones página 27

APPLIANCE OVERVIEW
1. Heating zone (max. 1800 W,
ø 190 mm)
2. LED display
3. Heating power control light
4. Heating temperature control light
5. Timer control light
6. Keyboard lock control light
GENERAL INFORMATION
1. The induction hob generates a strong magnetic field that induces eddy currents in the bottom of
the pan which produce heat. This means that only the pan is heated and not the hob, which saves
a lot of electrical energy and significantly reduces the cooking time.
2. Make sure to use a pan compatible with induction hobs. Do not use pans which have uneven bot-
toms, support feet or a diameter smaller than 11 cm. The maximum diameter is 20 cm. Do not use
glass, clay or aluminium pots.
3. Always keep the hob and the control panel clean. Use dry fingers and firm movements when op-
erating the keyboard.
4. The hob features and anti-overheating system. If the cooking temperature is too high or the pan
is empty, the "E5" error will be reported. Once the appliance cools down, the cooking process will
resume.
5. The hob features an undervoltage and overvoltage protection system. If the voltage changes too
much, the appliance will report an error (see the error table).
BEFORE FIRST USE
1. Remove the appliance from the box. Remove all plastic sheets, bags and styrofoam inserts.
2. During unpacking check appliance if there are not damaged.
3. Clean the appliance (see CLEANING & MAINTENANCE).
4. Make sure that your mains power supply corresponds to the voltage stated on the rating plate.
USAGE INSTRUCTIONS
1. Place the appliance on a firm, level and dry surface.
2. Plug the power cord to the mains. A short sound signal will be played, and the display (2) will show
the "OFF" status. Keyboard operation will always produce a sound signal.
3. Place a compatible pan on the heating zone (1). Any attempt to start the heating process without
a pan on the heating plate or with an incompatible pan will result in the "EO" error code on the
display (2).
4. Turn on the appliance using the on switch (11) and press the "Menu" button (8) to go to heating
parameter selection. If you take no action after turning on the hob, it will automatically turn off
after 10 seconds.
7. Keyboard lock button
8. "Menu" function selection button
9. Range adjustment button (DOWN)
10. Range adjustment button (UP)
11. On/Off switch
12. Anti-slip feet
EN
27