MPM MKE-12 Manual De Instrucciones página 28

EN
HEATING POWER – use the function selection button (8) to select the heating power; the
control light (3) will turn on, indicating that the heating process has started. Next, use the
range adjustment buttons (9) and (10) to set the power. The heating zone supports the
following power settings: 200, 350, 500, 650, 800, 1000, 1200, 1400, 1600, 1800 W.
The higher the power, the faster the hob heats up, which reduces the cooking time. You
can modify the power settings at any moment during cooking.
HEATING TEMPERATURE – if the temperature is your priority, use the function selection
button (8) to select the temperature; the control light (4) will turn on, indicating that the
heating process has started. Next, use the range adjustment buttons (9) and (10) to set
the temperature. The following temperature settings are available: 60, 80, 100, 120, 140,
160, 180, 200, 220, 240 °C. You can modify the temperature at any moment during
cooking.
CAUTION! If you do not declare the heating time, the appliance will automatically switch off
after 120 minutes.
HEATING TIME – you can set it between 0 and 180 minutes. Use the function selection
button (8) to select the timer; the control light (5) and (3) will turn on. Set the heating time
using the (9) and (10) buttons, and wait for a moment; the value you selected will light up
continuously, which means that the countdown has started. The hob will then alternate
between displaying the time and the power. Modify the latter if necessary. The same
applies to the heating time and temperature. After the heating time elapses, the hob will
switch off, which will be signalled by a sound.
1. The appliance is equipped with a key lock button. Press the button (7) to lock the keypad and hold
it briefly to unlock the keypad. Locking the keypad is signaled by lighting of the control lamp (6).
2. If you lift the pot/pan or move it away from the cooking zone, the heating process will stop au-
tomatically ("EO" message). The hob will resume the process using the previous settings if you
put the pot/pan back on the heating zone within 60 seconds. Otherwise the hob will switch off
automatically.
3. You can stop the heating process at any moment using the "ON/OFF" button (11).
CAUTION! The heating plates can be hot after use. Do not touch.
4. When the heating process is over, take the pot/pan away from the heating zone but do not unplug
the hob from the mains while the fan cooling the inside of the appliance continue to work. You can
safely unplug the hob only after the cooling fan stop.
5. When the plates cool down, clean the appliance (see: "CLEANING AND MAINTENANCE").
28