Publicidad
Idiomas disponibles
Idiomas disponibles
Using your Dishwasher..continued
;. Dishware
Drying
At the end of the cycle the dishwasher
will stop and a period of
condensation
drying will follow (more information
on
Condensation
Drying can be found in the Features,
Accessories,
and Options section of this manual.).
After 12 - 15
minutes of drying,
the LED display will show "0",
the "Sanitized"
indicator will light (except in the
Quick Wash and Rinse cycles).
G. Additional
Drying Heat
With this option you can raise the temperature
of the rinse
water, which will result in better and faster drying.
a) Press and hold the left "Cancel Drain" button as shown in
Figure 27, then press and hold the On/Oft button.
27
When the LED display shows a "0" or a "1", release both
buttons.
b) To enable the Additional
Drying Heat, press the left "Cancel
Drain" button until the LED display shows a "1".
c) To disable the Additional Drying Heat, press the left "Cancel
Drain" button until the LED display
shows a "0".
a) Press the On/Oft button. You may now wash dishes as
usual
H. Unloading
the
Dishwasher
1. General Guidelines
a) Unload the bottom rack first.
b) Unload the silverware
basket(s).
c) Unload the top rack.
o) If the Extra Tall Item Sprinkler was installed, return the
dishwasher
to its normal condition
(see the Loading Extra
Tall Items instructions
in the "Loading the Dishwasher"
section of this manual).
Dishware Drying
Unloading the Dishwasher
11
Publicidad
