Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Programmes
Programme selector
1. When the LED display screen brightens up, rotate the progra-
mme knob to select the desired programme.
2. Select the Inicio Diferido (Delay), Tiempo (Time), Intensidad
de secado (Intensity), Antiarrugas (Anti-Crease) functions for
additional options.
3. Press the Start/Pause button.
4. Press the On/Off button after the programme has completed.
Programme start
The drum will rotate after the programme starts. The cycle phase
LED in the display will light up and the remaining programme
time will be displayed.
Programme end
1. The drum will stop rotating after the programme ends. The
display will show "0:00", also the cycle phase LED showing
"End" and related LED will illuminate. The dryer will start Anti-
Crease function if user doesn't remove the load. (Refer to page
17). Please press On/Off button after unloading the tumble
dryer to cut off power and pull out the plug.
2. Deal with the problems according to "Trouble Shooting"
section, if there is an unexpected stop during the drying
procedure or the dryer shows an Error Code (Refer to page 24).
19
V.1
Publicidad
