Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Problem
Display is not on
"Ful" is lighting
"
"is lighting
Dryer does not start
Degree of dryness
was not reached or
drying time too long
There are humming
noises
The dryer switches
off at the end of the
programme
Warning!
！
If you cannot deal with the problems by yourself and need help:
• Press the On/Off button.
• Pull out the mains plug and call the service.
Solution
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected programme.
• Press the On/Off button.
• Check the water container. If it's full,
please pour out the condensate water
and restart the dryer. If the container is
not full, please restart the dryer directly.
• If the "ful" icon is still lighting after you
have finished the first two steps, please
call the service.
• Clean the lint filter.
• Connect the tumble dryer to the mains.
Turn on the tumble dryer.
• Check that the door is closed.
• Check the programme is set.
• Press the Inicio/Pausa button.
• Clean lint filter and heat exchanger.
• Empty the water container.
• Check the drain hose.
• Check installation place is appropriate.
• Keep the air inlet clean.
• Use higher drying intensity level
programme or time programme.
• The compressor is operating. These noises
are quite normal and do not indicate a fault.
• The dryer switches off automatically for
energy saving. This is not an error but a
normal function.
26
V.1
Publicidad
