ADE CK 2303 Instrucciones De Operación página 31

3. Use the button + or - to select "ON" or "OFF"
(OFF = you will no longer hear a beep when you
press the button).
4. Press SET to save the setting. "RCC ON" flashes on
the display.
5. Use the buttons + or - to select "ON" or "OFF"
(OFF = the clock receives no signals from the
time signal transmitter).
6. Press SET to save the setting. The display shows
"TIMEZONE", and "00" flashes, where "00" means
your current time zone ("00" is the default setting
for mainland Europe).
7. Proceed as described:
− Press the button + or - to set the desired
value.
− Press SET each time to save a setting.
8. Perform the following settings one after the
other:
− Hour (HOUR)
− Minute (MINUTE)
− Year (YEAR)
− Month (MONTH)
− Day (DATE)
− Date display (month/day or day/month)
− Language (LANGUAGE, applies only to the
weekday display)
9. Finally, press SET to exit.
10. Replace the battery compartment cover.
Starting signal reception manually
If the radio signal symbol to the left is
no longer displayed, the radio signals
from the time signal transmitter are no
longer being received. The time indicator
nevertheless continues precisely.
CK 2303 DCF radio-controlled alarm clock
31