ADE CK 2303 Instrucciones De Operación página 37

Switching between summer and
winter time
Switching between summer and winter time, or
vice versa, takes place automatically with good time
signal reception.
With daylight saving time enabled,
Saving Time) is displayed.
Resetting the radio-controlled clock
to factory setting
Reset the radio-controlled clock to its factory setting
if the display shows unusual or obviously incorrect
values.
1. Remove the batteries from the battery
compartment and wait a while.
2. Reinsert the batteries. Observe the correct
polarity (+/-).
3. Proceed as described in the chapter "Receiving
the time signal".
Cleaning
− If necessary, dust the item with a soft, dry cloth
or wipe it with a slightly moistened cloth.
Fault/Remedy
DCF77 signal is not received.
‚ Check the location.
‚ If necessary, start the radio reception manually.
‚ Set the time manually.
Temperature indication appears too high.
‚ Check whether the clock is exposed to direct
sunlight.
CK 2303 DCF radio-controlled alarm clock
(Daylight
37