Save A Multi- Stage Cooking To A Number Key - Sammic HM-1830 Manual De Uso Y Mantenimiento

SAVE A MULTI- STAGE COOKING TO A NUMBER KEY

For frequently used cooking program, you can save it to a number key and conveniently activate it by touching the number key and
then START pad.
Each of the number keys is pre- set with a cooking program. In waiting mode, touch any of the ten number pads, you are selecting a
cooking program, then press START pad to start the preset program.
The following are default settings for each of the number keys
Number/Memory Pads
Preset Cooking Time
The user is free to reset the cooking program stored under each of the ten number keys anytime. In order to set a cooking program,
which may contain up to 3 stages consecutive cooking periods with different power levels, and to designate a number key to this
program, see the example bellow:
To set medium power cooking for 8 min. and save it to number pad 5:
1. Open the door and place food in the oven, close it.
2. Touch Prog once.
3. Press number pad 5.
4. Press Power Level twice to select MED.
5. Touch number pads 8, 0, 0.
6. Press Prog to save.
NOTE : When the program has benn saved, you can press START to start cooking or you can also press STOP/RESET pad to cancel.
You can set a two or three stages cooking program by repeating the steps 4 and 5 once or twice.
Suppose you want to set a multi- stage cooking program to number pad 3.
First stage : 5 minutes of DEF microwave power cooking ;
Second stage : 3 minutes of HI microwave power cooking ;
Third stage : 1 minutes of MED microwave power cooking.
Step :
1. Open the door and place food in the oven, close it.
2. Touch Prog once.
3. Press number pad 3.
4. Press Power Level three times and press number pad to enter the cooking time.
5. Press Power Level once and press number pad to enter the cooking time.
6. Press Power Level twice and press number pad to enter the cooking time.
7. Press Prog to save.
Note: If you want the oven to start immediately after you touching any of the number keys instead of after you touching the Start
pad, press and hold down Stop/Reset for 5 sec until "P L" appears on display; now you don't need to press Start pad after selecting a
cooking program by touching any of the number keys.
If you want to cancel the auto- number start setting, you can press and hold down Stop/Reset for 5 sec until "P PROG" appears on
display.
HOW TO USE THE X2 PAD
More cooking programs can be stored under the number keys by using the X2 function.
In waiting mode, press X2, any of the number keys, and the Start pad, you can recall a preset cooking program as follows:
Number/Memory Pads
Preset Cooking Time
X2 function can only program one stage cooking. After setting is finished, press Stop/Reset to return to waiting mode. The oven will
start after you touching X2, any of the number keys and then the Start pad.
For example, to use the X2 function, and save a program of full power and 3 minutes cooking to number pad 8.
1. Open the door and place food in the oven, close it.
2. Touch Prog once.
3. Touch X2 pad once.
4. Press number pad 8.
5. Press Power Level once.
6. Touch number pads 3, 0, 0.
7. Press Prog to save.
NOTE : When the program has benn saved, you can press START to start cooking or you can also press Stop/Reset pad to cancel.
If you want the oven to start immediately after you touching any of the number keys instead of after you touching the Start pad,
press and hold down Stop/Reset for 5 sec until "P L" appears on display; now you don't need to press Start pad after selecting a
cooking program by touching any of the number keys.
If you want to cancel the auto- number start setting, you can press and hold down Stop/Reset for 5 sec until "P PROG" appears on
display.
16 ENGLISH
1 2 3
:10 :20 :30
1 2 3
:20 :40 1:00
4 5 6
:45 1:00 1:30
4 5 6
1:30 2:00 3:00
7 8 9
2:00 2:30 3:00
7 8 9
4:00 5:00 6:00
0
3:30
0
7:00