Cleaning And Care; Before You Call For Service - Sammic HM-1830 Manual De Uso Y Mantenimiento

COUNT OF OPERATIONS
You can read the count of how many times the oven has been used. To do this,
1. In waiting mode, press and hold down Stop/Reset.
2. Touch Power Level pad. The number on display shows how many times the oven has been used.
This function is for the user to analyze the usage of the oven and the traffic flow at a particular location where the oven is being used
commercially.
SWITCH
The oven can use single tube or double tubes to cook. For single tube mode, you can save power, while for double tubes, you can
use less time to cook. The default setting for the oven is double tubes, however, you can press Switch to change. Select it before
setting a cooking program.
ADJUST THE COOKING TIME
During cooking, you can press + /- to adjust the cooking time. Each press to adjust 20 seconds. The maximum time you can set is
1H :99 seconds. For the preset program, you cannot adjust the cooking time by pressing + /- .
CHILD PROOF LOCK
In waiting mode, press and hold Prog for 5 seconds. The oven is locked.
To release child lock,
Press and hold Prog for 5 seconds, the oven goes to normal.
RETURN TO FACTORY SETTING
If you want the oven return to the default factory setting, you can press Start pad and plug in the oven untill "00 00" shows on the
screen, then press the folllowing pads one by one : "1","2","3","4","5","6","7","8","9","0","Power Level","X2","Prog","Switch","+ ","-
","Stop/Reset","Start". And the screen will show "00 :18" ,open and close the door, then open it again. Beep will be heart to signal to
oven is back to factorty setting.
1. Turn off the oven and remove the power plug from the wall socket before cleaning.
2. Keep the inside of the oven clean. When food splatters or spilled liquids adhere to oven walls, wipe with a damp cloth. Mild
detergent may be used if the oven gets very dirty. Avoid the use of spray and other harsh cleaners as they may stain, streak or
dull the door surface.
3. The outside surfaces should be cleaned with a damp cloth. To prevent damage to the operating parts inside the oven, water
should not be allowed to seep into the ventilation openings.
4. Wipe the door and window on both sides, the door seals and adjacent parts frequently with a damp cloth to remove any spills or
spatters. Do not use abrasive cleaner.
5. Do not allow the control panel to become wet. Clean with a soft, damp cloth. When cleaning the control panel, leave oven door
open to prevent oven from accidentally turning on.
6. If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth. This may occur when the microwave
oven is operated under high humidity condition. And it is normal.
7. It is occasionally necessary to remove the glass tray for cleaning. Wash the tray in warm sudsy water or in a dishwasher.
8. The roller ring and oven floor should be cleaned regularly to avoid excessive noise. Simply wipe the bottom surface of the oven
with mild detergent. The roller ring may be washed in mild sudsy water or dishwasher. When removing the roller ring from cavity
floor for cleaning, be sure to replace in the proper position.
9. Remove odors from your oven by combining a cup of water with the juice and skin of one lemon in a deep microwaveable bowl,
microwave for 5 minutes. Wipe thoroughly and dry with a soft cloth.
10. When it becomes necessary to replace the oven light, please consult a dealer to have it replaced.
11. The oven should be cleaned regularly and any food deposits removed. Failure to maintain the oven in a clean condition could
lead to deterioration of the surface that could adversely affect the life of the appliance and possibly result in a hazardous
situation.
12. Please do not dispose this appliance into the domestic rubbish bin; it should be disposed to the particular disposal center
provided by the municipalities.
If the oven fails to operate:
1. Check to ensure that the oven is plugged in securely. If it is not, remove the plug from the outlet, wait 10 seconds, and plug it in
again securely.
2. Check for a blown circuit fuse or a tripped main circuit breaker. If these seem to be operating properly, test the outlet with
another appliance.
3. Check to ensure that the control panel is programmed correctly and the timer is set.
4. Check to ensure that the door is securely closed engaging the door safety lock system. Otherwise, the microwave energy will not
flow into the oven
IF NONE OF THE ABOVE RECTIFIES THE SITUATION, THEN CONTACT A QUALIFIED TECHNICIAN. DO NOT TRY TO ADJUST OR
REPAIR THE OVEN YOURSELF.

Cleaning and care

Before you call for service

ENGLISH 17