Whirlpool W7 OM5 4S P Guía De Consulta Diaria página 12

TROUBLESHOOTING
PROBLEM
The oven is not working.
The display shows the letter "F" followed
by a number or letter.
The oven does not heat up.
The light switches off.
The door will not open.
The home power goes off.
PRODUCT FICHE
The product fiche with energy data of this
WWW
appliance can be downloaded from Whirlpool website
docs . whirlpool . eu
HOW TO OBTAIN THE USE AND CARE GUIDE
> Download the Use and Care Guide
WWW
from our website docs . whirlpool . eu (you can
use this QR Code), specifying the product's
commercial code.
> Alternatively, contact our Client After-sales Service.
12
POSSIBLE CAUSE
Power cut.
Disconnection from the mains.
Oven failure.
When "DEMO" is "On" all
commands are active and menus
available but the oven doesn't
heat up.
DEMO appears on display every 60
seconds.
"ECO" mode is "On".
Cleaning cycle in progress.
Power setting wrong.
You can find our contact
details in the warranty
manual. When contacting
our Client After-sales
Service, please state the
codes provided on your
product's identification
plate.
SOLUTION
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
Turn off the oven and restart it to see if the problem
persists.
Try to perform the "FACTORY RESET" from, selectable from
"SETTINGS".
Contact you nearest Client After-sales Service Centre and
state the number following the letter "F".
Access "DEMO" from "SETTINGS" and select "Off".
Acceed "ECO" from "SETTINGS" and select "Off".
Wait for the function to finish and for the oven to cool
down.
Verify if your domestic network has at least a rating of more
than 3 kW. If no, decrease the power to 13 Ampere. Access
"POWER" from "SETTINGS" and select "LOW".
CONTACTING OUR AFTER-SALES SERVICE
XXXXXXXXXX XXXXXX XXXXXX
Model: xxxXXXXxx
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXX
XXX X X X X X XXX XX XXXX X X X
400011128416/B
Printed in Italy
XXXXX XXXXXXX