Measurement with potential risk
Ex .: High voltage circuit breaker under external influence of electromagnetic fields
from nearby energized devices.
The safety ground terminal must be connected before making the
other connections to the equipment.
2.
Turn on the device with the On / Off key (
3.
The display of the equipment will show the presentation
message MPK-215R.
4.
The AUTO CHECK message will appear next and then PRESS
START.
5.
Access the device's MENU using the
6.
Select SETUP TEST.
7.
To change the object's name, select EDIT OBJECT NAME and
write using the equipment keyboard (press
8.
Select TEST MODE to chose between MANUAL or AUTO
(explained below)
9.
When the current value is equal to or greater than 5 A, the
display will indicate the measured resistance.
).
or
15
R
button.
to confirm).