Publicidad
Idiomas disponibles
Idiomas disponibles
Caution: Never connect or disconnect the test leads with the equipment
performing tests. If you have to make any changes to the connection, it
must be done with the equipment in stand-by (not generating current) or
turned off.
5.1. Manual Mode
In manual mode, the operator selects and adjusts the current value
during the test, using the
1.
Access the device's MENU pressing the
2.
Use the
confirm.
3.
Use the
confirm.
4.
Use the
5.
Exit the menu and start the test.
6.
During the test, select the current using the
5.2. Auto mode
In auto mode, the operator preselects the current value before the test
(the pre-selected value cannot be changed during the test)
1.
Access the device's MENU using the
2.
Use the
confirm.
3.
Use the
confirm.
4.
Use the
5.
Choose the test current value, between 20 A to 200 A (using the
or the keyboard).
6.
Exit the menu and start the test.
.
to select SETUP TEST, and pressing the
to select TEST MODE, and pressing the
to select MANUAL, and pressing the
to select SETUP TEST, and pressing the
to select TEST MODE, and pressing the
to select AUTO, and pressing the
17
or
button.
to confirm.
.
or
button.
to confirm.
R
to
to
to
to
Publicidad
