Zanussi ZHC 6121 Manual De Instrucciones página 14

SAFETY INSTRUCTIONS
Caution! Closely follow the instructions set
out in this manual. All responsibility, for any
eventual inconveniences, damages or fires
caused by not complying with the instructions
in this manual, is declined. The extractor hood
has been designed exclusively for domestic
use.
Warning! Do not connect the appliance to the
mains until the installation is fully complete.
Before any cleaning or maintenance operation,
disconnect hood from the mains by removing
the plug or disconnecting the mains electrical
supply.
Always wear work gloves for all installation and
maintenance operations.
The appliance is not intended for use by
children or persons with impaired physical,
sensorial or mental faculties, or if lacking in
experience or knowledge, unless they are
under supervision or have been trained in the
use of the appliance by a person responsible
for their safety.
This appliance is designed to be operated
by adults, children should be monitored to
ensure that they do not play with the appliance.
This appliance is designed to be operated
by adults. Children should not be allowed
to tamper with the controls or play with the
appliance.
Never use the hood without effectively mounted
grating!
The hood must NEVER be used as a support
surface unless specifically indicated.
The premises where the appliance is nstalled
must be sufficiently ventilated, when the
kitchen hood is used together with other
gas combustion devices or other fuels. The
ducting system for this appliance must not be
connected to any existing ventilation system
which is being used for any other purpose
such as discharging exhaust fumes from
appliances burning gas or other fuels. The
flaming of foods beneath the hood itself is
severely prohibited.
The use of exposed flames is detrimental to
the filters and may cause a fire risk, and must
therefore be avoided in all circumstances.
Any frying must be done with care in order to
make sure that the oil does not overheat and
ignite.
Caution! Accessible parts of the hood
may became hot when used with cooking
appliance.
With regards to the technical and safety
measures to be adopted for fume discharging
it is important to closely follow the regulations
provided by the local authorities. The hood
must be regularly cleaned on both the inside
14
and outside (AT LEAST ONCE A MONTH).
This must be completed in accordance with
the maintenance instructions provided in this
manual). Failure to follow the instructions
provided in this user guide regarding the
cleaning of the hood and filters will lead to the
risk of fires.
Do not use or leave the hood without the lamp
correctly mounted due to the possible risk of
electric shocks.
We will not accept any responsibility for any
faults, damage or fires caused to the appliance
as a result of the non-observance of the
instructions included in this manual.
ENVIRONMENT CONCERNS
Recycle the materials with the symbol
the packaging in applicable containers to recycle
it. Help protect the environment and human health
and to recycle waste of electrical and electronic
appliances. Do not dispose appliances marked
with the symbol with the household waste.
Return the product to your local recycling facility
or contact your municipal offi ce department for
household waste or the shop where you purchased
this product.
USE
The hood is designed to be used either for
exhausting or fi lter version
INSTALLATION
The mains power supply must correspond to the
rating indicated on the plate situated inside the
hood. If provided with a plug connect the hood to a
socket in compliance with current regulations and
positioned in an accessible area, after installation.
If it not fi tted with a plug (direct mains connection)
or if the plug is not located in an accessible area,
after installation, apply a double pole switch
in accordance with standards which assures
the complete disconnection of the mains under
conditions relating to over-current category III, in
accordance with installation instructions.
Warning! Before re-connecting the hood
circuit to the mains supply and checking the
efficient function, always check that the mains
cable is correctly assembled.
. Put
.
www.zanussi.com