Publicidad
Idiomas disponibles
Idiomas disponibles
• Main Screen: Displays the Test Type, Test Mode, Filter [Fast (F),
Normal (N) or Slow (S)], Storage Mode [Auto (A) or Manual (M)] and
the Present Nameplate values (if enabled).
• Configure Instrument: Configures the instrument (see § 4.3).
• Recall Data: Stored data can be selected and displayed (see § 4.4).
NOTE: The program flow is two or three levels deep at various
points. The available choices for a level can be viewed by pressing
the ▼ or ▲ keys.
The ENTER key is used to select the following functions:
• Enter configuration menu.
• Enter Recall Data menu.
• Initiate storage of test results, accept location parameters and store the
Measurement Record.
3.3. Configure instrument
With the display showing Configure Instrument, press the ENTER key.
The configuration ring can be navigated around using the ▲ or ▼ key.
• Set Clock: Allows the setting of Time and Date.
• Setup Nameplate: Allows selection and editing of Present Nameplate
voltages or ratios. Predefined ratios can only be edited through
software.
• Select Test Type: Allows the selection of Test Type (VT/PT or CT).
• Select Test Mode: Allows selection of the Test Mode (Ratio or
Continuity/ Ratio in VT/PT Mode).
• Select Storage Mode: Allows the selection of data storage mode
(Automatic or Manual).
17
Publicidad
