Descargar Imprimir esta página

MEGABRAS TR8703 Manual De Uso página 5

Medidor de relación de transformación

Publicidad

Idiomas disponibles

Idiomas disponibles

These safety warnings are provided to ensure the safety of personnel and proper
operation of the instrument.
This instrument is protected from accidental voltages of not more than 50V
with respect to earth. The guaranteed level of protection of this equipment may
be compromised if used in a manner not specified by the manufacturer.
Read the instruction manual completely and follow all safety information before
attempting to use or service this instrument.
The Digital Transformer Ratiometer TR8703 is designed for use on de-
energized ("dead") transformers only. Make sure the test sample is
completely disconnected from AC power and is fully discharged.
Only qualified personnel should use the TR8703.
The TR8703 must not be used in a manner in which any of its components
(including test cables) are relied upon to provide protection from electric shock. No
high voltage insulation/protection is provided by any component of the TR 8703.
Always make sure the circuit is fully discharged before attaching any test
cables..
Do not touch, adjust, or reposition test cables while the TR8703 is conducting
a test.
Use caution on any apparatus: potentially high voltages and currents may be
present and pose a shock hazard.
Safety is the responsibility of the user.
Only use the charging unit supplied with the instrument to recharge the battery.
Never open the instrument while it is connected to AC power or when test
cables are connected to transformers, equipment, circuits, etc.
 WARNING
6

Publicidad

loading