Aiwa CSD-FD94 Instrucciones De Manejo página 3

- Avoid overloading AC power sockets and
extension cords beyond their capacity, as this
could result in fire or shock.
3 When not in use - Unplug the AC power cord from
the AC power socket or remove all the batteries if
the unit will not be used for several months or more.
When the cord is plugged in, a small amount of
current continues to flow to the unit, even when the
power is turned off.
: Maintenance
Clean the unit only as recommended in the Operating
Instructions.
Damage Requiring Service
Have the units serviced by a qualified service
technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have got inside the unit
- The unit has. been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been
damaged
DO NOT ATTEMPT TO SERVICE THE UNIT
YOURSELF.
Specifications |
Tuner section
Frequency range, antenna — FM: 87.5 - 108.0 MHz
Rod antenna, MW: 531/530 - 1,602/1,710 kHz (9/10
kHz step) Ferrite bar antenna, LW: 144 - 290 kHz
Ferrite bar antenna
Deck section
Track format — 4 tracks, 2 channels / Frequency range
— Normal tape: 50 - 12,500 Hz (ElAJ) / Recording
system — AC bias / Erasing system — AC erase /
Heads — Recording/playback head (1), Erasure head
(1)
CD player section
Disc — Compact disc / Scanning method — Non-
contact optical scanner (semiconductor laser)
General
Speaker — 100 mm cone type (2), 36 mm cone type (2)
/ Output — Headphones jack (stereo mini-jack) / Power
output — 5 W +5 W (DIN MUSIC POWER), 4.5 W +
4.5 W (EIAJ 3.2 ohms, T.H.D. 10%), 3.8 W + 3.3 W
(DIN 1% Rated Power) / Power requirements — DC 12
V using eight size C (R14) batteries, AC 230 V, 50 Hz/
Power consumption — 22 W / Dimensions (W x H x D)
— 460 x 192 x 262 mm / Weight (excluding batteries)
— 4.0 kg / Accessories — Remote control (1), AC cord
(1)
¢ Specifications and external appearance are subject to
change without notice.
¢ Specifications, trade mark, model name and the
double square symbol [5] are marked on the bottom
of the unit.
COPYRIGHT
Please check the copyright laws relating to
recordings from disc, radio or external tape for the
country in which the machine is being used.
If an erroneous display or malfunction occurs
Turn off the unit and press POWER STANDBY/ON®
while pressing Ml.
If the unit cannot be reset in the way above, disconnect
the AC cord and remove all the batteries to turn off the
display.
Leave the unit for a while and turn the power back on.
ENGLISH 3