Cochlear Baha 5 SuperPower Manual Del Usuario página 54

portable and mobile RF communications equipment and the Baha 5 SuperPower
The Baha 5 SuperPower is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the Baha 5 SuperPower can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the Baha 5 SuperPower as recommended below, according to
the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is
the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
54
Recommended separation distances between
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d=0.58√P
0.058
0.18
0.58
1.8
5.8
m
80 MHz to 800 MHz
d=0.35√P
0.035
0.11
0.35
1.1
3.5
800 MHz to 2,5 GHz
d=0.70√P
0.07
0.22
0.70
2.2
7.0