Tineco FLOOR ONE S7 STEAM Serie Manual De Uso página 16

Voice Prompt
(Contents may vary, please in kind prevail.)
Status
Voice prompts on
Voice prompts off
Connect Tineco app
Turn on the appliance
Switch to Steam mode
Switch to Boost Steam mode
First time to start the Steam mode/Boost steam
mode
Press the STEAM/BOOST STEAM mode button
Steam is ready for use
Clean Water Tank is empty
Dirty Water Tank is full
Need self-cleaning after decting
After self-cleaning
Bettery level 10%~20%
Bettery level 0%~10%
Turn off the appliance
Ready for charging
Clean Water Tank is empty during the appliance
working
Clean water tank is empty during Steam/Boost
steam mode
Dirt water tank is uninstalled
Brush cover is uninstalled
When Motor, pump or battery goes wrong
Select Suction mode on APP
Detect it is dirty during the appliance works
User press the self-cleaning button when the
appliance is dormant
Reminder
Voice prompts enabled.
Voice prompts disabled.
Download Tineco app and connect with
appliance.
Auto mode.
Steaming Mode.
Boost Steaming Mode.
Steam preparation for the first time is relatively
long, please wait.
Start preparing the steam.
Steam is ready for use.
Insufficient water in the Clean Water Tank. Please
add water.
Dirty Water Tank is full.Please empty and clean
the Dirty Water Tank.
Please turn on self-cleaning function to ensure
effective cleaning.
Self-cleaning complete.Please empty and clean
the Dirty Water Tank and the Pipe underneath it
to prevent odors.
Battery low.
Battery low. Please charge the appliance.
Powered off. Place appliance on charging dock.
Charging.
Insufficient water in the Clean Water Tank,turned
into AUTO mode.
Insufficient water in the Clean Water Tank, unable
to make steam.
Please install the dirty water tank.
Please install the brush roller cover correctly.
Error! Please contact customer service.
Suction Mode.
To optimize cleaning performance, please
perform self-clean cycle.
Please place appliance on the charging dock to
begin self-cleaning.
15