Functions Assigned To The Controllers - Edirol UR-80 Manual Del Usuario

Functions assigned to the controllers

Please affix the Cubase VST labels to the included template sheet. The explanation below will
follow these settings.
Track Control section
fig.VSTTrackControl_50
Track faders
The faders control the volume of the VST channel mixer.
By using the faders in conjunction with the bank button, you can control 16 audio channels,
8 VST-instrument channels, and 8 group channels.
Master fader
Control the master gain of VST Mixer.
Track Status buttons (TRACK STATUS/HQ PART)
These buttons switch the status of each channel.
By using the buttons in conjunction with the bank button, you can control 16 audio channels,
8 VST-instrument channels, and 8 group channels.
Mode
MUTE
SOLO
SELECT
-
Track Control knobs (TRACK/HQ CONTROL)
These knobs control channel Pan, Send 1 level, and Send 2 level. Use the Assign button to select
Pan, Send 1 level, or Send 2 level.
By using these knobs in conjunction with the bank button you can control 16 audio channels,
8 VST-instrument channels, and 8 group channels.
Bank button (BANK)
This button switches the bank of channels you are controlling.
BANK button status
CH 1–8
CH 9–16
INST 1–8
GRP 1–8
SELECT button status
OFF
GREEN
RED
ORANGE
Channels controlled
Audio channels 1–8
Audio channels 9–16
VST instrument channels 1–8
Group channels 1–8
Function
Switch channel mute on/off. On: lit Off: unlit
Switch channel solo on/off. On: lit Off: unlit
Select the channel. Selected: lit Not selected: unlit
Not used.
Controlling your software
41