Recording A Keyboard - Edirol UR-80 Manual Del Usuario

Recording audio

Recording a keyboard

You can record your keyboard performance onto the computer as audio data.
fig.keyboard.e
Connect to INPUT 1/L
and INPUT 2/R
Adjust the
input level
Adjust the
volume
Connections
Use a phone jack cable to connect your keyboard (or other device) to input jacks 1 and 2.
Sampling frequency select switch
Set this to the same sampling frequency as selected in your recording software.
Input impedance select switch
Set this to Lo-Z.
Input sensitivity knob
Use the input sensitivity knob to adjust the input level. To obtain the best audio quality, adjust the
input sensitivity knob until the level is as high as you can get it without causing the input peak
indicator to light.
Input monitor switch
Turn the input monitor switch on and adjust the input monitor level for the signal from your
keyboard. This will not change the recording level.
To adjust the input monitor volume, hold down the SHIFT button and turn the TIME dial.
REC SOURCE button
Set this to ANALOG (unlit).
Other notes
Don't connect anything to input jacks you are not using.
60
OUTPUT
Keyboard/digital piano
Set the sampling
frequency
Turn input monitor on, and adjust
the input volume appropriately
* Input monitor level -> SHIFT button
+ TIME dial
Set REC SOURCE to
ANALOG (unlit)