cecotec READYWARM 2000 MAX FORCE Manual De Instrucciones página 36

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Power regulator
2. Light indicator
3. Temperature knob
4. Handle
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
This device is packaged in a way as to protect it during transport. Take the device out
-
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any
-
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
3. OPERATION
Power regulator
Switch off: position 0.
-
Ventilation mode: select the first position.
-
Heating at reduced power: turn the selector (right) to the second position.
-
Full power heating: turn the selector (right) to the third position.
-
Temperature knob
Turn the temperature knob clockwise to increase temperature, and anticlockwise to decrease
it
36
READYWARM 2000 MAX FORCE BLACK/WHITE