SAKAWA CS2500 Manual Del Usuario página 84

•
Yes You are an inexperienced user we recommend that you practice doing simple jobs
and, if possible, in the company of an experienced person.
Personal safety.
•
Use this machine, accessories, tools, etc. in accordance with these instructions and in
the manner provided taking into account the working conditions and the work to be developed.
•
Be alert, watch what you are doing, and use common sense when operating this machine.
Never use the machine with defective protections or without safety devices.
• Do not modify the controls on this machine.
• Do not use this machine if any of its components are damaged.
•
Avoid inhalation of exhaust gases. This machine produces dangerous gases such as
carbon monoxide that can cause dizziness, fainting or death.
• Do not use this machine when you are tired or under the influence of drugs, alcohol or
medications.
•
Remove All keys or tools in the work area before starting this machine. A wrench or tool
that is nearby can be touched and projected causing personal injury.
•
Always maintain proper foot support and operate the machine only when it is on a fixed,
safe, level surface. Slippery or unstable surfaces can cause a loss of balance or control of the
machine.
•
When operating from above never work on a ladder, on a tree, or on an unsafe stand and
never operate with one hand.
•
Keep all body parts away from cutting elements and moving parts when the machine is
running. Before starting the machine, make sure that the cutting element is not in contact with
any objects. A moment of carelessness during operation can cause your clothing or some part of
the body to be cut by the cutting element.
•
Always hold the chainsaw with your right hand over the rear grip and your left hand over
the front grip. Holding the chainsaw with your hands inverted increases the risk of an accident
and should never be done.
•
Check the condition of the tree to prevent dry branches from falling hitting you while you
cut. When cutting a branch that is under tension, be alert to the risk of elastic return. When the
tension of the wood fibers is released, the branch, under a spring effect can hit the operator and
/ or project the chainsaw out of control.
•
Use extreme caution when cutting weeds and young shrubs. Fine materials can imprison
the saw chain and be projected towards you, or make you lose your balance under the effect of
traction.
•
Yes You are an inexperienced user we recommend that you perform a minimum practice
cutting logs on a trestle or sawing fork.
• Do not touch the exhaust of the machine with the engine running or just after it has stopped.
•
No Leave this machine running unattended. If you have to leave the machine unattended
turn off the motor, wait for the cutting tool to stop and unplug the spark plug wire.
•
No Try to remove the cut material from the cutter when it is moving. Be sure that the
machine is turned off when cleaning up debris material.
•
No Never take the machine by the cutting tool. Cutters have sharp edges that can hurt
you.
WORKWEAR
•
View adequately. Do not wear loose clothing or jewelry. Keep your hair and clothing away
from moving parts. Loose clothing, jewelry or long hair can be picked up by moving pieces.
- Eye protection (safety glasses/mesh/methacrylate screens).
- Hearing protection (earmuffs/earplugs).
- Protection for the head and face (helmet and mask).
- Hand protection (gloves/mittens).
- Protection for the legs (pants/leggings).
- Protection for the feet (safety boots).
•
One Appropriate protective clothing will reduce bodily risks caused by projected debris or
accidental contact with the saw chain.
• You must carry:
-Tools.
84