Publicidad
Idiomas disponibles
Idiomas disponibles
12. Move the lower door and adjust its position
to align lower hole site and upper hinge axis.
Turn the middle hinge by 180°. Change the
washer on the axis to the upper side and
adjust the middle hinge to the appropriate
position and then install it.
13. Screw out the upper hinge axis, turn the
upper hinge over and fix axis on it. Then place
it at side for use.
Step 12
14. Move the upper door to appropriate
position, adjust part ② and upper door. Move
the connecting wire ③ in the slot of upper
hinge(left), and install part ① onto the upper
hinge, then fix part ② by screws ④ . Finally
mount part ⑤ . (Please hold upper door by
hand when installing.)
left upper hinge cover (which is in the plastic bag)
upper hinge part
connecting wire
Self-tapping-screws
top cover B
5
5
Step 14
-51-
Step 13
Publicidad
