BURNHARD FLINT Manual página 20

ASSEMBLING THE PELLET SMOKER
ASSEMBLING THE BASE CABINET
1
Place the bottom panel with the inside
facing down. Enter the rollers into the
screw holes and tighten with the open
end wrench.
53
3
Attach both side panels to the
lower panel.
52
63
AA
AA
61
61
62
2
Turn the lower panel around. Screw the
magnet mounting plate on the marked
position and insert magnets into the holes.
57
AA
38
4
Screw the back panel onto the lower panel
and connect with the right and left panels.
61
AA
AA
61
54
6
Attach the shelf to the marked position of
the base cabinet.
AA
56
AA
AA
5
Mount the cross strut between the side
panels.
AA
AA
63
39
AA
AA
AA
AA
AA
AA
AA
AA